|
SJ-45X25(30)FM650/800/1000型
SJ-55X28(30)FM850/1200型
塑料薄膜吹膜机组 PLASTICS FILM BLOWING LINES
用途
用于吹制低密度聚乙烯(LDPE)、高密度聚乙烯（HDPE）及线性低密度(LLDPE)等塑料薄膜,广泛用于水果、食品、服装、纺织品、日用品等民用和工业品的内外包装。
APPLICATIONT
T hese lines can produce kinds of plastics film of LDPE,
HDPE and LLDPE etc, which are widely used in the packingof
fruit, food, clothing, textiles croceries for daily-use
and industrial products, and ground film. |
| 性能特点:
1、螺杆采用最先进的合金喷涂技术,经精密加工,硬度更高,耐腐蚀性
能更佳,寿命长,是氮化处理螺杆寿命2~3倍；
2、螺杆长径比大,塑化能力强,温度分布均匀，自动温控，制品使用
性能好；
3、整机结构紧凑,运转平稳,牵引装置一体化并可自调升降;
4、采用先进的变频技术,高效节能；
5、卷曲形式多样，可任意选择；
6、可按用户需要配置旋转机头。 |
|
Performance and Characteristics:
1.The cylinder screw rod uses the most advanced lloyspreads
technique, it will have a degree of hardness higher, the
anticorrosive ability is better, the life is longer after
the precise processing;
2.The screw rod major axis is bigger ,
plastic ability is strong ,the temperature distribution
is even,automatically controls warm, the operational performance
is good.
3.The draw gear integration and may the self-modulation
raise and fall.
4. Conversion technology which is in highly effective
energy conservation.
5. There are several types of winding for choice.
6. May need to dispose according to the user revolves
the nose. |
| 型号 |
Model |
SJ-45×25(30)FM650
|
SJ-45×25(30)FM800 |
SJ-45×25(30)FM1000
|
SJ-55×28(30)FM800 |
SJ-55×28(30)FM1200 |
| 螺杆直径 |
Screw diameter |
45mm |
45mm |
45mm |
55mm |
55mm |
| 螺杆长径比 |
Screw ratio |
25(30):1 |
25(30):1 |
25(30):1 |
28(30):1 |
28(30):1 |
| 最大挤出量 |
Max output |
20--45kg/h |
20---45kg/h |
20---45kg/h |
20---60kg/h |
20---60kg/h |
| 主电机功率 |
Power of main motor |
15kw |
15kw |
15kw |
18.5Kw |
22Kw |
| 最大折幅 |
Max fold width of film |
600mm |
750mm |
950mm |
750mm |
1150mm |
|
      |
SJ-35×30FM600型
SJ-40×25(30)FM600型
SJ-45×25(30)FM650
型塑料薄膜吹膜机组 PLASTICS FILM BLOWING LINES
用途
用于吹制低密度聚乙烯(LDPE)、高密度聚乙烯（HDPE）及线性低密度(LLDPE)等塑料薄膜,广泛用于水果、食品、服装、纺织品、日用品等民用和工业品的内外包装。
APPLICATIONT
T hese lines can produce kinds of plastics film of LDPE,
HDPE and LLDPE etc, which are widely used in the packingof
fruit, food, clothing, textiles croceries for daily-use
and industrial products, and ground film. |
性能特点:
1、螺杆采用最先进的合金喷涂技术,经精密加工,硬度更高,耐腐蚀性
能更佳,寿命长,是氮化处理螺杆寿命2~3倍；
2、螺杆长径比大,塑化能力强,温度分布均匀，自动温控，制品使用
性能好；
|
3、整机结构紧凑,运转平稳,牵引装置一体化并可自调升降;
4、采用先进的变频技术,高效节能；
5、卷曲形式多样，可任意选择；
6、可按用户需要配置旋转机头。 |
Performance and Characteristics:
1.The cylinder screw rod uses the most advanced lloyspreads
technique, it will have a degree of hardness higher, the
anticorrosive ability is better, the life is longer after
the
precise processing;
2.The screw rod major axis is bigger ,plastic ability
is strong
the temperature distribution is even, automatically controls
warm, the operational performance is good.
|
3.The draw gear integration
and may the self-modulation raise
and fall.
4. Conversion technology which is in highly effective
energy
conservation.
5. There are several types of winding
for choice.
6. May need to dispose according to the user
revolves the nose. |
| 型号 |
Model |
SJ-35×30FM600
|
SJ-40×25(30)FM600 |
SJ-45×25(30)FM650 |
| 螺杆直径 |
Screw diameter |
35mm |
40mm |
45mm |
| 螺杆长径比 |
Screw ratio |
30:1 |
25(30):1 |
25(30):1 |
| 最大挤出量 |
Max output |
20—30kg |
20—40kg |
20—45kg |
| 主电机功率 |
Power of main motor |
7.5kw |
11kw |
15kw |
| 最大折幅 |
Max fold width of film |
550mm |
550mm |
600mm |
|
|
